Description
- UTL HELIAC Solar Inverter uses solar power on the first priority and electricity from the grid on the second priority to charge the battery. Its model name is HELIAC 1200/50AMP and its rating is 1000VA. It supports 1000 watts load and it is 12V solar inverter.
- UTL Heliac 1200/50A, 1000VA/12V PWM Solar Inverter has many latest features like PWM (Pulse Width Modulation) solar charge controller, LCD features, maximizing solar preference, built in IT mode, DG mode, boost charging mode etc. customer needs and to make it suitable for multiple applications.
- UTL Heliac Solar Inverter is one of the best inverter for home, which uses both solar power and grid power to charge the battery. In the first priority, the load will run from solar energy, the battery will be charged and in the second priority government electricity will be used.
Technical Details of Heliac 1200VA / 12V
Particulars | Description |
System Rating | 1250/50A |
Capacity | 1000VA |
Operating DC Voltage | 12V |
Nominal Grid Voltage | 230V |
Battery Low Buzzer | 10.8V |
Battery Low Cut | 10.5V |
Battery High Cut | 16.5V |
Grid Charging Voltage (Equalize) | After 30Days |
Grid Charging Current | 12A/15A |
Grid Reconnect @ Battery Voltage | 11.8V |
Output Phase | 1 Phase |
Nominal Output Voltage | 220V±8% |
Max. Output Current | 2.9A |
Nominal Frequency | 50Hz±1% |
Output Waveform | Sine wave |
Typical Efficiency | ≥80% |
Maximum PV Power Recommended | (150W/160W)x5 |
Solar current max | 50A |
Solar current min | >3A (Below 3A, System will act like Solar Absent) |
Protection | Overload, Battery Low, Battery High, Output Short, Battery Reverse, Over Heat, Over frequency, Under Frequency, SPV High. |
LED Indication | System ON, (IT Mode, SMF/TUB, Boost Charging, DG Mode, Grid Charging) Enable/Disable. |
Switches | Reset for System ON/OFF, UP, Down, Back, Enter(For LCD Calibration) |
Standard Compliance | IP20 |
Weight | 11Kg |
Dimension L x W x H | 300x265x128 mm |
Reviews
There are no reviews yet.