Solar DC SPD and AC SPD (Surge Protection Device) is increasingly becoming popular in solar world. An SPD is a device that is designed to protect our equipment from the effects of power surges, spikes and other electrical disturbances.
Since the electrical circuits can be AC and DC, the SPDs can also be categorized as AC SPD and DC SPD. They are now being used by companies as well as individuals who have solar panels installed at their homes.
DC SPD & AC SPD At Best Price
An SPD device requires proper earthing to function and protect the appliances. They work by providing a path for the electrical current to flow through them and then diverting the spiked or extra voltage to the ground via earthing/ground wire.
When a power surge occurs, excess voltage is diverted away from your sensitive electronic equipment such as computers, televisions and other devices.
The price of any solar protection device depends on its type, power rating and solar brand. However, Kenbrook Solar is providing DC and AC SPDs at very affordable prices. You can see the prices below.
SPD Model
Selling Price
Buy It Now
320V 1Ph AC SPD (2 Pole)
Rs. 799
320V 3Ph AC SPD (4 Pole)
Rs. 1,240
600C DC SPD (2 Pole)
Rs. 799
1000V DC SPD (3 Pole)
Rs. 1,249
1Ph AC SPD with 600V DC SPD Combo
Rs. 1,499
(Inclusive of all taxes) Prices can vary ± 3% to 5% depending on location, promotions and availability, and solar brand.
The function of an SPD is to protect the circuit from current spikes. But since the circuit can be AC or DC, it requires different SPD to serve the same purpose. In simple words, an AC circuit needs an AC SPD while a DC circuit can be protected with a DC SPD.
AC SPDs provide protection to the AC power circuits and are used for home appliances and other electronics.
The 320V AC Surge Protection Device is a 2 pole single phase gadget that is suitable for a power supply system of 50Hz and 60Hz Alternating Current.
The Elmak AC SPD from Kenbrook Solar featuring pluggable cartridges, high-quality material and colour indicators provides 320V protection. The device is highly responsive and efficient enough to protect your appliances against high voltage.
320V AC SPD
Specifications of 320V 2 Pole AC SPD
The 2 pole 320 V SPD is a single-phase device that is used in AC circuits to redirect current using earthing in case of overvoltage. Mentioned below are the specifications of the device.
Particulars
Description
Product Type
AC Surge Protection Device
Rated Voltage
320 Volt Single Phase
Response Time
Within <25ns (nano seconds)
Poles
2 (1 Phase + 1 Nutral)
Operating Temperature
-40°C to + 80°C
Frequency
50Hz and 60Hz
Basic Requirement
Earthing /Grounding
Protection Type
Over-Voltage (AC)
Mounting Support
DIN Rail Mount
Dimension (LxWxH)
9cm x 6cm x 3.5cm
Selling Price
Rs. 799 (Inclusive of all taxes)
Buy This Item on Amazon
#3. 600V 2 Pole DC SPD
The 600V DC Surge Protection Device is a 2 pole gadget that works at a DC power of 600V to protect the devices and the electrical installation against high voltage.
The features of Kenbrook Solar Elmak DC SPD 600V 2 Pole SPD include pluggable and easy to replace cartridges, colour indicators and high-quality material. Besides, the responding time of the device is less than 25 nanoseconds.
600V DC SPD
Specifications of SPD 600V DC 2 Pole
The protecting device from Kenbrook Solar is loaded with several smart, reliable and automated features and specifications that are mentioned below.
Particulars
Description
Product Type
DC Surge Protection Device
Rated Operational Voltage
600V DC
Poles
2P
Response Time
Within <25ns (nano seconds)
Frequency
50Hz and 60Hz
Protection Type
Over-Voltage (DC)
Operating Temperature
-40°C to + 80°C
Basic Requirement
Earthing /Grounding
Mounting Support
Standard 35mm DIN Rail Mount
Dimension (LxWxH)
9cm x 6cm x 3.5cm
Selling Price
Rs. 799 (Inclusive of all taxes)
Buy This Item on Amazon
#4. 1000V 3 Pole DC SPD
The SPD 1000V DC 3 Pole is a circuit-protecting device that is operated at a 1000V DC power supply. It is a variant of 600V DC 2 Pole SPD.
Similar to the previous one, this high-quality device from Kenbrook Solar delivers world-class services and features to protect the circuit from damaging the appliances in case of high voltage.
1000V DC SPD
Specifications of 1000V 3 Pole DC SPD
Besides pluggable cartridges, high-quality material, colour indicators and flameproof shell, the 1000V DC 3 Pole SPD comes with the following specifications.
Particulars
Description
Product Type
DC Surge Protection Device
Rated Operational Voltage
1000V DC
Poles
3P
Response Time
Within <25ns (nano seconds)
Frequency
50Hz and 60Hz
Protection Type
Over-Voltage (DC)
Operating Temperature
-40°C to + 80°C
Basic Requirement
Earthing /Grounding
Mounting Support
Standard 35mm DIN Rail Mount
Dimension (LxWxH)
9cm x 6cm x 5.5cm
Selling Price
Rs. 1,249 (Inclusive of all taxes)
Buy This Item on Amazon
#5. 1Ph AC SPD with 600V DC
1 phase AC SPD with 600V DC SPD is a 2 in 1 combo that offers you complete protection. As suggested by its name, you will get 1 nos. X 320V (1 Ph) AC SPD along with 1 nos. x 600V DC SPD in this combo.
These SPDs are made with high quality material and will respond within seconds in case of any power disturbance. Furthermore, they are equipped with replaceable cartridges and colour indicators for better user interface.
320V AC with 600V DC SPD
Specifications of 1Ph AC SPD with 600V DC SPD
DC with AC SPD is a complete solar protection device that protects both AC & DC side appliances. The detailed specification of this combo is given below.
An AC SPD protects AC circuits and all sensitive appliances from voltage strike and other electrical disturbances. It diverts the surges to the ground to serve the purpose.
SPDs are to handle power surges and they divert the excess voltage to the ground. But they aren’t circuit breakers. For complete protection, you must install MCB along with SPD.
An AC SPD deals with AC (alternative current) power and protects your electrical load/components, while a DC SPD works with DC (direct current) power and protects solar components.