Original price was: ₹ 5,000.00.₹ 3,410.00Current price is: ₹ 3,410.00. (Inclusive of All Taxes)
200 in stock
【High Performance Micro-Controller】High efficiency i.e. >95% SMU, equipped with high-speed microcontroller, allowing it to perform its tasks more reliably and efficiently.
【Solar Panel Configuration】Compatible with both 12V and 24V solar panels. It has an automatic voltage selection feature. Solar panels can be installed as: 12V, 50A: Upto 750W | 24V, 50A: Upto 1500W.
【In-Built Protection for Battery Under/Over-Charge】With 200Ah max. battery capacity, it uses four stages PWM regulation method to charge the battery i.e. Boost, Absorption, Float and Equalization.
【Prioritize Solar Power over Grid Power】This 12/24V 50A SMU prioritizes the use of solar power over grid power in order to reduce grid consumption. It uses grid power only when it is insufficient to meet the load requirement.
【Wide Operating Temperature】This 50A SMU can be operated in harsh environmental conditions. It can be used in temperatures ranging from 0°C to 50°C. Furthermore, it has wall-mounted fixing and can be installed in small spaces due to its compact size and lightweight.
The UTL 12V/24V 50A SMU (Solar Management Unit) transforms your existing inverter into a solar inverter. It is capable of charging a battery that has reached deep discharge.
The Solar Management Unit (SMU) from UTL is a highly reliable device with a long operational life. This SMU protects against overcharging voltage, overcharging current, under voltage, battery reverse polarity, solar reverse polarity, reverse current flow (from battery to solar array), and overheating.
Useful Tips:
Technical Specifications of 50A UTL SMU
The accessories and detailed specifications of 50 amp solar management unit are listed below.
|
Particular |
Description |
|
Model |
UTL 50AMP SMU |
|
System Operating Voltage |
12V/24V DC (12V Solar Panel With 12V Battery & 24V Solar Panel With 24V Battery) |
|
Solar Modules Size (Max.) |
12V, 50A: Upto 750W | 24V, 50A: Upto 1500W |
|
Max Solar Current |
50A |
|
Nominal Grid Voltage |
230V AC |
|
Battery Charging Regulation |
4 stage PWM (Bulk/Absorption/Float/Equalize) |
|
Display Parameters |
Batt. Voltage, Batt. Current, Batt. Type, Solar Voltage, Solar Current, Mode Selection, Saving: kWh, Mains Present, Low, high, absent, Max. PV Current |
|
Protections |
Batt. Reverse Polarity, Batt. Reverse Current, Over Current of SPV, Solar High Voltage, SPV Reserve Polarity, Load Short Circuit through AC Fuse, Solar Low Voltage, Over Temperature |
|
Operating Temperature |
0°C to 50°C |
|
Fixing |
Wall Mounted |
Equipped with high-speed and high-performance microcontroller. This latest technology microcontroller will improve the system’s efficiency. The compact design and wall mounting structure make it better compared to similar available alternatives in the market.
This SMU prioritizes solar power over grid power. It only uses grid power when solar power is insufficient to meet all of your energy needs.
NOTE: The three-pin plug slot on the side is only for grid bypass. Don’t use it for AC power output connections.
UTL 12V/24V 50A SMU comes with an LCD display for easy monitoring of dynamic data/figures and operating status.
It displays the data in digital format. Now you can see, compare and analyze your savings in Rs. and Units.
The SMU has an automatic voltage selection feature and can therefore work with either one or two solar batteries. It automatically detects 12V and 24V panels and adjusts its performance accordingly.
It prevents your battery from being overcharged and deep discharged. This PWM technology-based Solar Management Unit utilizes four stages charging algorithm to extend battery life.
This SMU can work with both 12V and 24V solar panels. But it requires 12V panels to operate on a single 12V inverter battery and 24V panels to operate on two 12V (total 24V) inverter batteries.
Odd/Unusual combinations like 12V panels with two inverter batteries or 24V panels with a single 12V inverter battery will not work.
The three-pin plug slot on the side is only for grid-to-inverter bypass. It will bypass the grid electricity when solar power is unavailable. So don’t get confused and don’t use this point for AC power output connections.
PLEASE NOTE: This product is not a solar inverter. It is a solar management unit/solar charge controller that is used with an existing inverter battery.
| Weight | 2.400 kg |
|---|---|
| Dimensions | 9 × 6 × 3 in |
You must be logged in to post a review.
Yes, our experiences sales team help customers to buy the product as per their requirements. You can Call or WhatsApp us at 9990001837 (Mon to Sat, 09:00AM to 06:00PM)
You can check out our deal, discount coupon and sale offers at this page: Deals, Discount Coupons & Sale Offers
Yes! We provide virtual help for DIY installation through video, call and whatsapp video call.
We dispatch all orders within 1 working day & it takes approx. 4 -10 days to reach customer, depending on location.
We accept 7 days return from the date of delivery for wrong product, damaged, defective or performance issues in product. Please read our policies for more details: Return Policy
The warranty of any product can be availed by contacting our customer care support at +91-9990001837.
Within 1 Working Day
To All Over India
@Best Price Guarented
24x7 Technical Support
Kenbrook Solar Pvt. Ltd.
Office Address: 182/3/1, Ward No. 6, Opp. Indian Oil Petrol Pump, Bhagani Rd, Near Ganpati Store, Surya Colony, Paonta Sahib, Himachal Pradesh, 173025
Copyright ©KENBROOK SOLAR PRIVATE LIMITED. All rights reserved.
Reviews
There are no reviews yet.