【About Prodcut】 This is 15AMP 1000V solar DC fuse and 30V 1000V Fuse Holder used to protect your solar panels, inverters/battery from shorts circuits and over current for more than 15A.
【Fuse】The fuse link is capable of interrupting the low over current associated with faulted PV (reverse current, multi-array fault) string arrays. Fuse link is made of pure silver encapsulated in a melt tube made of low tin welding and high strength and fuse tube filled with high pure quartz sand chemically as the arc medium. The fuse body is connected to the contact terminals by spot welding.
【Fuse Holder】 The fuse holder is made by special plastic fitted with contacts and consists of fusion pieces. Fuse has a compact and convenient device, use for safety. DC fuses made accord with UL248-1 standard. DC fuse designed to use for solar power system.
【Uses】It is an electrical protection device that serves to provide over current protection of an electrical circuit. Fuse is essential component is a metal wire or strip that melts when too much current is passed, so that it can stop or obstruct the current. Kenbrook Solar DC fuses have been used as essential safety devices.
【Protection】When highly current flows then DC fuse opens or break the circuit. It protects from short circuit, overloading, mismatched load, or device failure is major or some cause of fuse operation.
【Easy Replacement】If fuse burn, you can easily replace it yourself. It is a sacrificial tool, once a fuse is in operation it is an open circuit, and must be replaced or reconnected depending on its type.
|Fuse Holder Rated
|2 .5 to 10 sq mm
|Made according to
|Most high power consumption
|Fuse Rating Breaking Capacity
|22x66x 96 mm
|Fuse holder Weight
NOTE – DO NOT OPEN UNDER LOAD