* M12 thread connectors used to take out wires with any box to make it IP65/67 (Waterproof). These connectors are commonly used for Solar ACDB/DCDB.
* M12 connector is heavy duty MC4 M12 wire connector. Kenbrook MC4 Solar Connector Conductor Pins are made of Copper with an outer tin plated. Made of high quality PPO+PA material, it forms a very solid connection after crimping the pin with the wire, and they operate perfectly under heavy loads.
* After complete the installation, your joint is waterproof. This solar panel cable connectors with resistance to extra high and low temperatures and fireproof.
* They are compatible with various insulation diameters from 2.5mm to 6mm single and double PVC solar DC wires.
About Product: This is a set of 5 male and female pairs of MC4 M12 Thread Solar Connector with Copper Tin Plated Pins. These connectors are commonly used with MC4 connectors to connect wires to DCDB and ACDB. MC4 M12 connectors are suitable for connecting single and double PVC solar DC wires of any size from 2.5 mm² to 6 mm wires.
Specifications of MC4 M12 Thread Connector
|Maximum Working Voltage||DC 1000V|
|Suitable||2.5mm² to 6mm²|
|Temperature Range||-40 ℃ ~ +125 ℃|
How to Install MC4 Threads Connectors
Step 1: Strip the solar panel cable to expose about 3/8＂ of the stranded copper cable.
Step 2: Crimp the Terminal Well and Insert the Terminal Directly into the Connector.
Step 3: Using the Solar Spanner to Slide the Strain Relief/Grommet and Nut Back on the MC4 Connector. Firmly hand tightens the nut.
Step 4: Well done