Sale!

Kenbrook Solar Elmak DC SPD 600V 2 Pole Surge Protection Device (600V 2 Pole)

 735.00 (Inclusive of All Taxes)

20 in stock

SKU ELMAK-DC-SPD-600V-2P Category Tag

Main Features:

►SPD Protect Electrical Appliance from Over current, Overheating & Unwanted current

►Maximum VOC 600V DC

►Easy to replace

►Its quick response time is < 25 ns

►Torque Main Circuit 3.5 Nm

►Rated short circuit breaking capacity: 20-40 kA

► Extra current sent to Earthing

Description

Protection】SPD main work is to protect the electric DC Appliance against transient fault supply, extra current, unwanted current, overheating, over-current and extra current sent to earthing.

Indications】SPD shows the colour of operating status: Green (normal) / Red (abnormal).

Use】SPD is mainly used for protected electrical appliances and you cannot install SPD if you have not installed Earthing.

Easy to Use】SPD full form is Surge Protection Device. It is Pluggable Design that is very easy to replace. You cannot install SPD if you have not installed Earthing and SPD sends extra currant to Earthing.

Why to Install SPD】The unique weather makes the solar power plant vulnerable to overvoltage surges from lightning strikes and static discharges. The greater challenge is to protect these installations from direct and indirect lightning strikes that present a high risk of damage.

Reason to Install SPD】To prevent high power from passing through the electronics appliances and causing high voltage damage to the PV system, the SPD must have installed. To do this, all conductive surfaces must be directly grounded and all wiring entering and exiting the system (such as Ethernet cables and AC mains) must be connected to ground via a surge protection device.

Technical Details

Particulars Description
Max VOC 600 VDC
Pole 2P
Quick Response Time < 25 ns
Nominal Discharge Current In (8/20) 20KA
Maximum Discharge Current (8/20s) 40KA
Voltage Protection Level Up 2KV
Certification IEC61643-1
Wiring Capacity Hard Wire 4~25 mm
Flexible Wire  4~16 mm²
Stripping Length 10 mm
Torque Main Circuit 3. 5 Nm
Protection Class All Profile IP40; Connection Port IP20
Ambient temperature  -30 degree C to 70 degree C
Installation Environment No obvious shock and vibration
Dimensions (W**H* D) 36 x 90 x 67. 6 mm
Weight 0. 24 kg

 Features

  • SPD Protect Electrical Appliances from Extra current & Unwanted current
  • Maximum VOC 600V DC
  • Easy to replace
  • Its quick response time is < 25 ns
  • Torque Main Circuit 3. 5 Nm
  • Rated short circuit breaking capacity: 20-40 kA
  • Protection Overheat, over current
  • Extra current sent to Earthing

Additional information

Weight 0.250 kg
Dimensions 4 × 3 × 2 in

Brand

Kenbrook Solar

We offer a wide range of solar accessories such as MC4 Connectors, DC Wires, Solar Panel Cleaning Kit, Solar Street Light, ACDB DCDB AJB, AC-DC SPDs, and many more.
See: More Products From Kenbrook Solar.
KEnbrook Logo Squire

Reviews

There are no reviews yet.

Be the first to review “Kenbrook Solar Elmak DC SPD 600V 2 Pole Surge Protection Device (600V 2 Pole)”